Vintage Lowrider 26" Bent Leg Steel Classic Springer Chrome Fork 1"

VINTAGE LOWRIDER 26" Bent Leg Springer Fork Chrome 1" Threaded Steel Classic Cruiser Chopper Bike 3/8" Axle

Size: 26 Inch

• Designed for 26" cruiser/lowrider wheels (ISO 559 mm bead seat diameter).

• Typical tire fit on springer forks: up to 26 x 2.125 (≈54 mm wide) is common on many builds; exact clearance varies by rim/tire profile and rocker position.

• Intended for beach cruisers, lowriders, and custom builds—not for aggressive MTB use.

Steerer: Threaded 1 Inch (22.2 mm ID)

• Internal diameter: 22.2 mm (for 22.2 mm quill stems).

• External diameter: 25.4 mm (standard 1" threaded steerer).

• Works with standard 1" threaded headsets; common thread pitch is 24 TPI on most modern/aftermarket sets (verify if your headset is a less-common standard).

• Headset note: crown race seat on 1" forks is typically 26.4 mm or 27.0 mm—match your headset’s crown race size.

• Not compatible with 1-1/8" threadless systems without adapters.

Steerer Length: 195 mm (109 mm Threaded)

• Total steerer length: 195 mm (≈7.68").

• Threaded portion length: 109 mm (≈4.29").

• Unthreaded portion (below threads): approx. 86 mm (≈3.39").

• Fit check: your head tube length + headset stack height + any spacers/washers must be ≤ 109 mm so the locknut fully engages. If your combined stack exceeds 109 mm, you’ll need a longer threaded section or a different fork.

Material: Steel

• Stout steel construction for that classic springer look and ride feel.

• Chrome-plated for a bright, mirror finish; clean with non-abrasive polish to maintain plating.

• Steel springer designs offer compliance and style; expect more flex than modern rigid forks (part of the lowrider vibe).

Axle Size: 3/8"

• Accepts front hubs with 3/8" (≈ 9.5 mm) axles—standard on many cruiser/BMX/lowrider fronts.

• Dropout width (O.L.D.) on springer fronts is typically 100 mm (industry-standard for most rim-brake front hubs); confirm your hub’s spacing.

• Not intended for 14 mm BMX axles without reducer hardware.

• Classic show-chrome finish to match lowrider/chopper aesthetics.

• Store dry; avoid harsh chemicals or steel wool that can haze or scratch plating.

Brand Name: Vintage Lowrider

• Purpose-built for lowrider and custom cruiser builds; “bent leg” springer silhouette with truss-rod look is period-correct.

• Classic springer design with front rockers/links for axle mounting; distinctive bent legs and truss-rod aesthetic.

• No V-brake/canti posts on springer legs. Braking is usually:

  • Coaster brake rear (most common on lowriders), and/or

  • Front caliper brake using a crown/bridge mount or adapter bracket (verify hole/bracket availability), or

  • Drum brake front hub as a custom option.

• Disc tabs are generally not present on classic springers.

Compatibility & Use

• Bike types: Lowrider, beach cruiser, chopper, boardwalk, parade/show builds.

• Stem: 22.2 mm quill stems only (fits 1" threaded systems).

• Headset: 1" threaded; match crown race size (26.4 mm or 27.0 mm) and 24 TPI threads (most common).

• Fenders: Often compatible with 26" cruiser fenders; final fit depends on tire width and fender radius/mount points.